LOKLiK • iCraft Fine-Point Blade Kit 2pcs

This set includes two fine-point blades and a blade holder for the LOKLiK iCraft. With a cutting angle of 45°, these blades can be used on light to medium-weight materials such as paper, self-adhesive vinyl, heat transfer vinyl, stickers, cardstock, and reflective foil. For cutting heavier and thicker materials, such as faux leather and heavy cardstock, we recommend the iCraft deep-point blades. Whether you’re cutting intricate details or working with various materials, this blade delivers the precision you need.

Store unused blades in a dry, safe place to prevent rust and damage. Cleaning your blade and holder regularly can extend blade life. These iCraft fine blades use a different blade holder from the deep-point blades and are not compatible with the LOKLiK Crafter cutting machine.

How to install a new blade in your LOKLiK iCraft:

1. Turn off the machine: Ensure the cutting machine is completely switched off before replacing the blade.
2. Remove the old blade: Carefully open the blade holder by twisting it loose and remove the old blade.
3. Insert the new blade: Take a new fine-point blade from the packaging and place it in the holder with the sharp end pointing down.
4. Secure the holder: Screw the blade holder back into place to secure the new blade.
5. Test the blade: Switch the machine back on and make a test cut on a scrap piece of material to check if the blade is properly installed and working as expected.