LOKLiK • iCraft Deep-Point Blade

The iCraft deep-point blade kit contains 2 replacement blades. With a cutting angle of 60°, these blades can be used on heavy materials such as faux leather, PVC template magnetic sheets, EVA foam board, ... Whether you’re cutting intricate details or working with various materials, these blades provide the precision you need.

Please note:
These blades are not compatible with the LOKLiK Crafter cutting machine.
These iCraft deep-point blades use a different blade holder than the fine-point blades. Check the deep-point blade set if you also need a holder.
These blades can be used to cut:

• Faux leather

• Shrink plastic sheets

• PVC templates

• EVA foam sheets

• Magnetic sheets

How to install a new blade in your LOKLiK iCraft™?

1. Power off the machine: Ensure the cutting machine is fully powered off before replacing the blade.

2. Remove the old blade: Carefully unscrew the blade holder and remove the old blade.

3. Insert the new blade: Take a new deep-point blade from the package and place it into the blade holder with the sharp edge facing down.

4. Secure the blade holder: Screw the blade holder back in place to secure the new blade.

5. Test the blade: Turn on the machine and perform a test cut on a scrap piece to ensure the blade is correctly installed and working as expected.

Care and maintenance
Store unused blades in a dry, safe place to prevent rust and damage. Regularly cleaning your blade and holder can extend the blade’s lifespan.